Prevents freezing of water systems during winter storage
Safe for copper and brass pipes, as well as all types of plastic pipes
Formula based on propylene glycol
Contains anti-corrosion agents
Read more.
Instructions for use:1. Drain the entire water system as completely as possible. Open the hot and cold water taps and open all other drains. Blow out as much water as possible from the system using compressed air.
2. Drain the hot water tank. Leave the bleed valve open after draining. Lay a bypass pipe for the hot water tank by disconnecting the inlet and outlet pipes and connecting them with fittings or a hose and hose clamps.
3. Add antifreeze to the drinking water system. DO NOT DILUTE.
4. Pressurise the system and switch on the water-dispensing pump.
5. Open all taps, starting with the furthest tap, and let the antifreeze flow until the coloured liquid becomes visible. Then close the drain opening.
6. Repeat step 5 at each drain opening for fresh water.
7. Flush the toilet several times to make sure it is completely drained. NOTE: Make sure the storage tank is completely drained.
8. Activate the pump valve several times to ensure that the waste water system contains sufficient antifreeze for protection.
